evo1

Members
  • Content count

    51
  • Joined

  • Last visited


Community Reputation

0 Neutral

About evo1

  • Rank
    Advanced Member

evo1's Activity

  1. evo1 added a post in a topic Cranking no start gy6   

    Started for a few seconds yesterday. Theres fuel in the bowl. Seemed to start only if i leaned the bike left or right repeatedly.  Any geusses why if i lean the bike it wants to start?
    Also on to another problem. I was holding down the start button and brake lever as normal to start it but once I let go of both for some reason the bike was cranking without me holding down lever or start button, it kept on cranking. I even took the key out of ignition but it kept cranking. Only way to stop was to remove the battery. Any thoughts?
    • 0
  2. evo1 added a post in a topic Cranking no start gy6   

    Cleaned carb, no fuel getting to the carb. Nothing in the bowl.
    • 0
  3. evo1 added a post in a topic Cranking no start gy6   

    Did compression test, its at 190psi
    • 0
  4. evo1 added a post in a topic Cranking no start gy6   

    Hi, there is fuel in the fuel line , filter, and carb. What is good compression numbers for the motor? 
    • 0
  5. evo1 added a topic in Discuss Anything related to scooters   

    Cranking no start gy6
    Hi, scooter doesnt want to start. Has fresh gas, getting fuel and spark. Compression is good. Valves are adjusted correctly. Only started with starter fluid, ran for 2 seconds.
    Upgrades are ncy 61mm bolt on kit with ncy 61mm head. Exhaust, 26mm carb, blue cdi and ncy coil.
    • 14 replies
    • 257 views
  6. evo1 added a post in a topic Scooter cranks with no keys/kill switch on   

    Its stored outside with a cover. Im going to replace my starter with an extra one i have.  Thanks for the info
    • 0
  7. evo1 added a post in a topic Scooter cranks with no keys/kill switch on   

    I bought it new. Iv always felt that i had a bad ground somewhere on the wiring harness.
    • 0
  8. evo1 added a topic in Discuss Anything related to scooters   

    Scooter cranks with no keys/kill switch on
    My scooter has been sitting since the fall, charged the battery over night, tried to start it today and it only cranks. Battery started to drain after cranking it for awhile, i put a mini jump starter on it and it started to crank fast. The weird thing is that its cranking without me holding down the brake lever and the start button. Also cranks with the kill switch on the on position. Even with the keys to the off position in the ignition it still cranks. Doesnt even need keys in the ignition, it still will crank. Once i take the cables off the battery it stops cranking.
    Any info? Thanks
    • 4 replies
    • 290 views
  9. evo1 added a post in a topic Stator and regulator up grade   

    USA, which regulator 6 or 7 pin?
    • 0
  10. evo1 added a post in a topic Stator and regulator up grade   

    I looked at the cdi, its a AC. Can i run new wires or do i need a harness? Dan I saw on your youtube channel that you ran new terminals and wires to the regulator, on the new 11 pole stator.
    • 0
  11. evo1 added a post in a topic Stator and regulator up grade   

    Up grading headlights.
    I have stock 4 pin regulator. Has red, white, yellow, and green wires. New stator with 11 pole has 3 yellow and 1 green. Do i need the 6 or 7 pin regulator? The 6 pin has 1 terminal with white, red, green. The 7 pin has white, red, green and black. Dont know what black is for? If i run the 6 pin regulator, i would have to run 3 yellow wires from stator to 1 terminal on regulator, ground out the green on stator to engine? And then run the red, white, and green from stock harness terminal to the other terminal on regulator? And cap off the stock yellow pin on stock harness terminal?
    • 0
  12. evo1 added a topic in Discuss Anything related to scooters   

    Stator and regulator up grade
    Hi, looking to up grade to a 11 pole stator, what stator and regular do you recommend to get. I know there are various single, two plug regulators and also ac and dc stators.
    • 9 replies
    • 517 views
  13. evo1 added a post in a topic Brake light not lighting up?   

    Wow it was the bulb, i put the wrong one in lol
    Thanks
    • 0
  14. evo1 added a topic in Discuss Anything related to scooters   

    Brake light not lighting up?
    I press both left and right brake handles, neither make the rear brake light light up. Any ideas? Something to do with the wiring? Fyi its a 150cc taotao bws
    Thanks 
    • 6 replies
    • 391 views
  15. evo1 added a post in a topic Dim and bright headlights?   

    I put a voltmeter on battery with scooter off, it was 12.57, with scooter running it was 13.20, and when i gave it 3/4 throttle it went up to 14.00......
    This was with the regulator that i barrowed, lights seem to be good, i gave it full throttle for a few seconds and none of the bulbs blew. I also raised the idle up a little, because i think it was a little low, maybe that also gave the lights a low light out put with the idle to low? The lights seem to have a  normal brightness now, but get a small amount brighter with higher rpm's.
    • 0